Salt Spray Chamber
Description: Salt spray test chamber is used to simulates corrosion test in artificial environment, it is used to check the method for testing quality of metal material with or without corrosion protection.
Application: Phosphated surfaces (with subsequent paint/primer/lacquer/rust preventive) Zinc and Zinc-alloy plating (see also electroplating) Electroplated chromium, nickel, copper, and tin.
Testing Standards: IASTM.B117: 2011, IEC 60068-2-11: 2021, ISO 11474: 2014, ISO 9227: 2017 , JIS H 8502: 2018, GB/T 2423.17: 2008, GB/T 10125: 2002, GB/T 5170.8: 2008, GB/T 5170.11: 2008, GB/T 20121: 2006
Package: Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual and video inside.
Delivery: 7-14 days.
Technical Parameters
Model | SZ–60(A-C) | SZ–90(A-C) | SZ–120(A-C) | SZ-160(A-C) | SZ–200(A-C) |
Inner Dimension WxHxD (mm) | 600x400x450 | 900x500x600 | 1200x500x800 | 1600x500x1000 | 2000x600x1200 |
Outer Dimension WxHxD (mm) | 1160x1100x600 | 1510x1240x800 | 2120x1300x1250 | 2470x1340x1450 | 2900x1550x1650 |
Testing Capacity | 108L | 270L | 480L | 800L | 1440L |
Saline Tank Capacity | 15L | 25L | 40L | 40L | 40L |
Power | AC220V1Φ10A | AC220V1Φ20A | AC220V1Φ25A | ||
Spray Method | Type A: Continuous spray.
Type B: Programmable spray, continuous spray. Type C: Continuous spray, cycle spray and programmable spray. |
||||
Lab Temperature | Saline testing method(NSS AASS)35℃±1℃/Corrosion-resistant testing method(CASS)50℃±1℃ | ||||
Pressure Pot Temperature | Saline testing method(NSS AASS)47℃±1℃/Corrosion-resistant testing method(CASS)63℃±1℃ | ||||
Saline Concentration | Sodium chloride solution with 5% concentration or 0.26g copper chloride is added to each liter of sodium chloride solution with 5% concentration. | ||||
Compressed Air Pressure | 70~170Kpa | ||||
Spray Volume | 1.0~2.0ml/80cm2/h (at least collecting 16 hours and take the average value) | ||||
Relative Humidity in the lab | Above 85% | ||||
PH Value | 6.5~7.2 3.0~3.2 |