Tel: +86-15622955621 Email: sales@gaat-equipment.com

Dust Chamber

Description: It is the test that for working ability of the specimen under the condition of free setting dust and no obvious air flow, or place in blast air and large sand dust outdoor site, and other similar site conditions.
Application: Applied to electrician, electron, vehicle, motorcycle and other products.
Testing Standards: IEC 6008-2-68-1994, IEC 60529:2001, GJB150.12-2009, GB7000-1-2007, GB10485.
Package: Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual and video inside.
Delivery: 20-30 days.

Technical Parameters of Dust Chamber

ModelSZ-500SCSZ-1000SCSZ-1800SCSZ-2000SC
Capacity(L)512100017283375
Inner Size WxHxD (mm)800x800x8001000x1000x10001200x1200x12001500x1500x1500
Exterior Size WxHxD (mm)1300x1660x11001500x1860x13001700x2100x15001900x2300x1700
Temperature rangeRT+10℃~60℃
Control accuracyTemperature deviation: ±1℃

Temperature fluctuation: ±0.5℃

Dusting specsmesh size: 200 mesh counts 75um. The metal thread diameter 50um.

blowing dust concentration:2 – 4 kg/m3

dust size: ≤75um chalk or FE powder

Inner MaterialInner material is SUS304# stainless steel.
Outer MaterialCold rolled sheet anti-rust coating processing or # SUS304 stainless steel.
Operation InterfaceUser-friendly touch screen controller with multiple languages available
Optional auxiliariesVacuum device and connection tube for specimen
Sample internal pressure drop2Kpa, 5Kpa, 10Kpa can set as per testing needs

Note: The gauge displays relative air pressure, negative value is displayed below the standard atmospheric pressure, and extreme low pressure can reach -90KPa

Air exhaust speedAir exhaust speed per hour is 40-60 times the sample volume
Safety featuresChamber over-temperature protection, fan motor over-heat protection relay, chamber pressure auto-balancing protection, heater short circuit, overload, overheat protection, blowing motor overload, short circuit protection, earth leakage protection, circuit overload, short-circuit protection, phase sequence protection.

Share Dust Chamber With Your Clients

Facebook
Twitter
LinkedIn

Leave a Message

Ask For A Quick Quote

Please fill out the form below to request a quote or to request more information about us. We will contact you within 1 working day, please pay attention to the email with the suffix “@gaat-equipment.com”