Cyclic Corrosion Test Chamber
Description: Cyclic Corrosion Test Chamber is used for imitating natural status in increasing imitation tests. The imitating condition is harder than the status that we usually meet. The tester can combine the following status such as salt smog, dryness, humidity, condensation, normal temperature, and low temperature.
Application: The chamber is for products used in an intense changeable environment, such as parts of automobiles, navigation equipment, camera equipment, building material, electroplate coating, and resistance to metal electrolytic corrosion in the electrical system.
Testing Standards: DO160 E/F/G, GB/T 20854-2007/ISO14993-2001, GB/T24195-2009/ ISO16151:2005, GJB 150.11A-2009, GB/T 2424.17-2008/ IEC60068-2-11:1981, GB/T 2423.18-2012/ IEC 60068-2-52:1996, GB/T 2423.3-2006/ IEC6008-2-78-2001 , GB/T 10125-2012/ ISO9227-2006 , GB/T 31467.3-2015, ASTM B117, ASTM B368, GB/T 10587-2006, GB/T 10586-2006, GB/T 5170.8-2008.
Package: Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual and video inside.
Delivery: 20-35 days.
Technical Parameters
| Model | SZ-1000D | SZ-1600D | SZ-2000D |
| Inner Dimension WxHxD (mm) | 1200x800x1000 | 1600x800x1000 | 2000x800x1000 |
| Outer Dimension WxHxD (mm) | 2250x1720x1220 | 2950x1720x1220 | 3550x1900x1220 |
| Lab Temperature Range | 20℃~70℃ | ||
| Saturated Barrel Temperature Range | RT~ 70℃ | ||
| Humidity Range | 20%~98%RH | ||
| Salt Water Spraying Volume | 1~2mI/80cm²/h (at least collecting 16 hours and take the average value) | ||
| Spraying Fog Pressure | 70~170KPa | ||
| Sample Placement Angle | 20°±5° | ||
| Rapid Alternating Process of Dry Wet Salt Spray | Salt spray test 1min~99H set at will
Less than 30min Dry test 1min~99H set at will Less than 30min Damp heat test 1min~99H set at will |
||
| Spraying Fog Mode | Continuous spraying, cycle spraying, circle spraying selected by user. | ||
| Control Accuracy | Temperature deviation:±2.0℃; Humidity deviation: when≥75%RH, ≤+2-3%R.H; when<75%RH, ≤±5%R.H | ||
| Chamber Material | Inner titanium plate, outer stainless steel plate paint | ||
| Cooling Method | Water cooling | ||
| Control System | Siemens PLC+Siemens temperature module+man-machine interface | ||
| Power Supply Condition | AC380V 50HZ/60HZ | ||
Please see the video about our salt spray chamber department below.
