Thermal Shock Test Chamber Three Zones (Damper Type)
Description: Thermal Shock Chamber Three Zones has three independent zones: hot, ambient, and cold. The addition of the ambient zone allows for three zone testing, which is a requirement of some military standards. This unique and versatile chamber configuration can also be used for two zone tests. This is accomplished by programming the product carrier to automatically transfer the product from hot to cold, and back again, eliminating a dwell in the ambient zone.
Application: Suitable for testing the quality of metals, plastic, rubber, and electronics amongst other materials.
Testing Standards: IEC 60068-2-1: 2007, IEC 60068-2-2: 2007, IEC 60068-2-14: 2009, EIAJ ED-2531B: 2004, JASO D 014-4: 2014, MIL-STD-883H: 2010, MIL-STD-202G: 2002, GB/T 2423.1: 2008, GB/T 2423.2: 2008, GB/T 2423.22: 2012, GB/T 2424.13: 2002, GJB 360B: 2009, GJB 150.5A: 2009.
Package: Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual and video inside.
Delivery: 20-30 days.
Technical Parameters
| Model | SZ–I–42(A～C) | SZ–I–80(A～C) | SZ–I-100(A～C) | SZ–I–150(A～C) | SZ–I–252(A～C) | SZ–I–450(A～C) |
| Inner Dimension WxHxD (mm) | 400x350x300 | 500x400x400 | 500x450x450 | 600x500x500 | 700x600x600 | 800x750x750 |
| Outer Dimension WxHxD (mm) | 1400x1850x1450 | 1500x1930x1530 | 1500x1950x1600 | 1600x2200x1850 | 1750x2120x1970 | 1900x2270x2210 |
| Temperature Range | (150℃~A: -45℃; B: -55℃; C: -65℃);（High temperature zone: +60℃~+150℃; Low temperature zone: -10℃~-65℃) | |||||
| Heating Time (Heating Zone) | RT~200℃: About 35mins. | |||||
| Cooling Time (Cooling Zone) | RT~-70℃: About 55mins. | |||||
| Temperature Response Time/ Time Change | ≤5mins/ ≤within 10sec | |||||
| Precision Temperature Control/ Distribution Accuracy | ±0.5℃/ ±2.5%℃ | |||||
| Inner/Outer Material | Inner material is SUS304# stainless steel, Outer material is cold-rolled steel plate with paint treatment. Can be able customized. | |||||
| Insulation Material | Heat-resistance high-density aluminum silicate fiber cotton or PU foam insulator materials. | |||||
| Cooling System | Semi-hermetic double-stage compressor (water-cooled type) /Hermetic double-stage compressor (air-cooled type) | |||||
| System | P.l.D+S.S.R+ Micro-computer balanced temperature control system. | |||||
| Protection Device | Non-fuse breaker, high and low pressure protective switch of the compressor, refrigerator high-pressure protective switch, failure warning system, electronic alarm | |||||
| Accessories | Viewing window (special order), shelves (freely adjustable, 2 pcs), power-On test cable port, castor, horizontal support. | |||||
| Power | KAC380V 50HZ/60HZ 3Φ | |||||
| Compressor | France Tecumseh or Germany Bitzer | |||||
