Altitude Chamber
Description: An altitude chamber is a sophisticated testing facility that is designed to simulate a range of conditions, including temperature and low-pressure altitude, and can also incorporate optional humidity control.
Application: The altitude chamber is commonly used in industries such as aerospace, military, and medical to evaluate the performance and durability of products and components under harsh and extreme conditions.
Testing Standards: Mil-Std 202G (conditions 105C, A/B/C/F), Mil-Std 810G (condition 500.5), IEC 60068-2-39, IEC 60068-2-40, RTCA/DO-160F, JIS W 0812.
Package: Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual and video inside.
Delivery: 40-60 days.
Technical Parameters of Altitude Chamber
| Model | SZ-WDP-512G | SZ-WDP-1000G | SZ-WAP-512G | SZ-WAP-1000G | |
| Type | Vacuum temperature chamber | Vacuum temperature and humidity chamber | |||
| Temp range | -70℃～+150℃ | ||||
| Humidity range | / | / | 10%～98%RH (by +20℃～+85℃under atmospheric condition） | ||
| Pressure range | Atmospheric to 0.2Kpa, 0.5kPa, 1.0Kpa, 4.0Kpa | ||||
| Control accuracy | Temperature resolution: 0.01℃ Humidity resolution: 0.1% RH
Temperature deviation: ±2℃ (atmospheric pressure) Temperature fluctuation: ±0.5℃ Temperature uniformity:≤2℃ (atmospheric pressure) Humidity deviation: ≤±3%RH(>75%RH); ≤±5%RH(≤75%RH) (atmospheric pressure) Pressure deviation：≤±2Kpa (atmospheric~40.0Kpa) ≤±5%Kpa (40.0 ~ 2.0Kpa) ≤±0.1Kpa (<2.0Kpa) Pressure fluctuation：≤±0.1Kpa |
||||
| Heating rate | ≥2℃/min (-70℃→+150℃,average, atmospheric, no specimen inside) | ||||
| Cooling rate | ≥1℃/min (+150℃→-70℃,average, atmospheric, no specimen inside) | ||||
| Pressure up & down rate | Atmospheric → 0.2Kpa: ≤30min
Pressure recovery rate: ≤10.0 Kpa/min |
||||
| Inner Size WxHxD (mm) | 800*800*800
(512L) |
1000*1000*1000
(1000L) |
800*800*800
(512L) |
1000*1000*1000
(1000L) |
|
| Exterior Size WxHxD (mm) | 1150×2050×2100 | 1300×2200×2200 | 1200×2050×2700 | 1400×2200×2700 | |
| Standard configuration | User-friendly touch screen controller with remote control and monitoring software
Fixable and moveable casters with leveling function Observation window on the door Sample shelves 2pcs Three-color tower light with buzzer to indicate oven operation status |
||||
| Optional auxiliaries | Test porthole with sealing | ||||
| Safety features | Compressor overheat/over current/over load, condensation fan overheat protection
Vacuum pump overload protection Test chamber over temperature protection, automatic pressure balance protection, chamber bottom anti-water accumulation protection Heater over-temperature, short circuit protection Power earth leakage protection, overload protection, short-circuit protection Fan/motor over heat, overload, short circuit, reversal blowing protection |
||||